...
...
...
|
Article ID: 791
Last updated: 8 Jul, 2026
York Air Handler: JHE Re: Mitigation Control Boad - Status Codes / Fault Codes This air handler uses an A2L refrigerant and requires a Mitigation Board and Refrigerant Sensor. The table below describes the LED displays for status and fault codes. A "lockout" can be Reset by cycling power to the air handler. Status & Fault Codes:
This article was:
Helpful |
Not helpful
Report an issue
Article ID: 791
Last updated: 8 Jul, 2026
Revision: 7
Access:
Public
Views: 6
Comments: 0
|
Powered by KBPublisher (Knowledge base software)