PAR-FL32MA - Fan Speeds

Mitsubishi

Re: Remote Control - Fan Speeds

The number of controlled fan speeds is adjustable through the remote control.

Follow the following steps to set the fan speed range.

Step 1: Press the SET button with a pointed but not sharp object.

• Make sure that the remote controller display indicates that the unit is stopped.
• MODEL SELECT will blink, and the model number (a three-digit figure) will be lit.

Step 2: Press the FAN button to access the fen speeds.

Step 3: Press the TEMP buttons to set the setting number.

• Settings that correspond to each setting number will appear on the display.
• * If an error is made, press the ON/OFF button to cancel all the settings for the individual settings and go back to Step 1 above. 

Step 4: Repeat Steps 2 and 3 above to make other settings.

Step 5: Press the SET button to store these settings.

• The display will stay lit for three seconds and then go off.