Knowledgebase

Sanyo - "H" Fault Codes

Article ID: 146
Last updated: 16 Jan, 2017

Sanyo Variable Refrigerant Units

Re: "H" Fault Codes / Error Codes

Compressor Faults
H01 Compressor Fault, Over current (Comp1)
H02 Compressor Fault, Locked rotar current detected (Comp1)
H03 Compressor Fault, No current detected (Comp1)
H05 Compressor Fault, Discharge temp not detected (Comp1)
H06 Compressor Fault, Low Pressure trip
H07 Compressor Fault, Low oil level
H08 Compressor Fault, Oil sensor Fault (Comp1)
H11 Compressor Fault, Over current (Comp2)
H12 Compressor Fault, Locked rotar current detected (Comp2)
H13 Compressor Fault, No current detected (Comp2)
H15 Compressor Fault, Discharge temp not detected (Comp2)
H27 Compressor Fault, Oil sensor fault (Comp2)
H28 Compressor Fault. Oil sensor (connection failure)
H31 Compressor Fault. IPM trip (IMP current on temperature)

This article was:   Helpful | Not helpful
Report an issue
Article ID: 146
Last updated: 16 Jan, 2017
Revision: 1
Access: Public
Views: 689
Comments: 0
Also read