PTAC Configuration Menu

PTAC

Re: CONFIGURATION SETTINGS

The control can be configured to operate a wide range of options. The options listed below with the * are the factory default settings. If these are acceptable, then the unit does not require any additional configuration and is fully operable.

To configure the unit, first select the configuration feature code setting and then an option code to change from the factory default setting.

To enter configuration feature mode:

Press and hold the + and - buttons.  While the two buttons are pressed, press the "OFF" key twice within a 2 second period. The display will indicate "--.".

• Press the "HEAT" button to scroll to the next configuration selection. Press the "COOL" button to go to the previous selection.
• Use the "+" and "-" buttons to change the selection settings.

To exit configuration mode, press the "OFF" button.