Article ID: 545
Last updated: 16 Dec, 2022
Mammoth Heat Pump: D013 Re: Diagnostic Codes / Error Codes / Fault Codes The control board in these WSHPs has a Green status light. The light will flash to indicate fault/operating status.
To Reset ⇒ Cycle Power to the board or unit
This article was:
Helpful |
Not helpful
Report an issue
Article ID: 545
Last updated: 16 Dec, 2022
Revision: 6
Access:
Public
Views: 3655
Comments: 0
|
Powered by KBPublisher (Knowledge base software)