Knowledgebase
Knowledgebase
News
Downloads
Ask a Question
...
Knowledgebase Close
KB Home / Thermostats / Honeywell / TH8320R & TH8321R VisionPro / Humidity / Configure the Thermostat to Control a Humidifier

Configure the Thermostat to Control a Humidifier

Article ID: 12
Last updated: 6 Apr, 2017

Honeywell Thermostat: TH8320R & TH8321R VisionPro

Re: CONTROL A HUMIDIFIER

Both the TH8320R and TH8321R thermostat can be configured for direct-control of a Humidifier.

► The TH8320R does not have an internal humidity sensor or humidifier outputs so you will be required to add additional REDLink accessories.

CONFIGURE THERMOSTAT

  • Enter "Installers Setup" and modify the following settings:
Setup# Description Option
800 HUMIDIFIER TYPE bypass/fan pwrd
803 HUMIDIFIER WIRING t-stat terminal U1
805 WINDOW PROTECTION off
806 USE HUMIDIFIER IN HT MODE yes
806 (a) USE HUMIDIFIER IN OFF MODE no
807 HUMIDIFIER CONTROL hum when heat on
810 HUMIDIFIER PAD 12 months
  • Press "Done".
  • Answer "Yes" to exit Installer Setup.
  • Answer "Yes" to save changes.

WIRING

Thermostat Furnace or A/H Humidifier
R R
C C Wire 1
U1 (jumper from R or Rc)
U1 (wire nut) Wire 2

 

 

This article was:   Helpful | Not helpful
Report an issue
Article ID: 12
Last updated: 6 Apr, 2017
Revision: 8
Access: Public
Views: 126
Comments: 0
Also read

Prev
Next
« Humidity Control
Operating a Humidifier »

rss
Powered by KBPublisher (Knowledge base software)