Article ID: 678
Last updated: 6 Feb, 2023
Honeywell Thermostats: Prestige IAQ Re: Configure 2-Stage Heat, 1-Stage Cool Heat Pump Step 1: Enter Configuration Screen First-Time Power-Up → Step 2. Enter Setup Information Service Configuration ⇒ Go into "Installer Setup"
Step 2: Enter Setup Information below:
Step 3: Press "Done"
Step 4: Press "HOME" to go back to the Home Screen.
This article was:
Helpful |
Not helpful
Report an issue
Article ID: 678
Last updated: 6 Feb, 2023
Revision: 3
Access:
Public
Views: 86
Comments: 0
|
Powered by KBPublisher (Knowledge base software)