Knowledgebase

TH5220 - Replace Batteries

Article ID: 6
Last updated: 30 Mar, 2018

Honeywell Thermostat: TH5220 / TH6220

Re: Battery Replacement

BATTERY TYPE: The TH5220 & TH6220 FocusPro thermostats requires 2 AA batteries.

LOW BATTERIES: When the batteries get weak, the thermostat should flash "Replace Batteries".

BLANK SCREEN: A blank thermostat screen could be an indication of bad batteries.


BATTERY REPLACEMENT

  • Press down on the battery compartment tab at the top-right-hand corner of the thermostat.
  • Fold the battery compartment out to the right.
  • Lift the battery compartment slightly to release battery compartment from the thermostat.
  • Remove the old batteries and discard.
  • Install new batteries
    • Pay attention to the + and - orientation printed on the battery compartment.
  • Re-install the battery compartment.

HOW-TO VIDEO: An instructional video is available at www.ghacinc.com under the Service & Repair page's  "Help Yourself" section.

This article was:   Helpful | Not helpful
Report an issue
Article ID: 6
Last updated: 30 Mar, 2018
Revision: 5
Access: Public
Views: 97
Comments: 0