T6 Pro - 2Ht/1Cl Heat Pump Setup

Article ID: 311

Last updated: 8 Jan, 2025

Honeywell Thermostat: TH6220U T6 Pro

Re: 2Ht/1Cl Heat Pump Setup

To enter Installer Setup:

Press and hold the "Center" button and the "+" button together for 3 seconds.
Press "Select" to enter Setup.
Press "Select" to cycle through setup options.
Press "+" or "-" to change values.
Press "Select" to confirm changes or "Back" to ignore changes.
To Finish and Save changes, press "Home".

Setup#	Function	Options
120	Schedule Options	0 = Non-Programmable 2 = 5/2 Programmable 3 = 5/1/1 Programmable 4 = 7 Day Programmable
125	Temperature Scale	0 = Farenheit
130	Outdoor Sensor	0 = None
200	Heat Equipment	2 = Heat Pump
205	Heat Type	7 = Air to Air Heat Pump
218	Reversing Valve	0 = O/B Energizes in Cool
220	Compressor Stages	1
221	Heat/Backup Stages	Backup Stages = 1
253	Aux & E Terminal	0 = Aux & E Together
255	Backup Heat	1 = Electric Furnace
300	System Changeover	1 = Automatic
303	Auto Changeover Differential	3 Deg F.
340	Backup Heat Droop	2 Deg F.
350	Backup Ht Upstage Timer	0 = Off
355	Compressor Lockout	-- = Off
356	Aux Heat Lockout	-- = Off
365	Cool 1 Cycle Rate	3
370	Heat 1 Cycle Rate	3
375	Aux Ht Cycle Rate	9
387	Short-Cycle Time	3 Min
425	Intelligent Recovery	1 = Yes
430	Min Cool Setpt	65 Deg F.
431	Max Heat Setpt	82 Deg F.
435	Keypad Lockout	0 = None 1 = Partial 2 = Full
500	Wired Indoor Sensor	0 = No
702	Air Filter Qty	1
711	Filter 1 Timer	0 = Off
1400	Backlight	1 = Continuous
1401	Brightness	3
1410	Clock	12
1415	Daylight Savings	1 = On
1420	Temperature Offset	0 Deg F.

This article was: Helpful | Not helpful

Report an issue

Article ID: 311

Last updated: 8 Jan, 2025

Revision: 5

Access:

Comments: 0

BBCode tips