T6 Pro - 2Ht/1Cl Conventional Setup

Article ID: 310

Last updated: 6 Feb, 2023

Honeywell Thermostat: TH6220U T6 Pro

Re: 2Ht/2Cl Conventional Setup

To enter Installer Setup:

Press and hold the "Center" button and the "+" button together for 3 seconds.
Press "Select" to enter Setup.
Press "Select" to cycle through setup options.
Press "+" or "-" to change values.
Press "Select" to confirm changes or "Back" to ignore changes.
To Finish and Save changes, press "Home".

Setup#	Function	Options
120	Schedule Options	0 = Non-Programmable 2 = 5/2 Programmable 3 = 5/1/1 Programmable 4 = 7 Day Programmable
125	Temperature Scale	0 = Farenheit
130	Outdoor Sensor	0 = None
200	Heat Equipment	1 = Conventional
205	Heat Type	2 = High Eff Gas
220	Cool Stages	1
221	Heat Stages	2
300	System Changeover	1 = Automatic
303	Auto Changeover Differential	3 Deg F.
365	Cool 1 Cycle Rate	3
370	Heat 1 Cycle Rate	3
371	Heat 2 Cycle Rate	3
387	Short-Cycle Time	5
425	Intelligent Recovery	1 = Yes
430	Min Cool Setpt	65 Deg F.
431	Max Heat Setpt	82 Deg F.
435	Keypad Lockout	0 = None 1 = Partial 2 = Full
500	Wired Indoor Sensor	0 = No
702	Air Filter Qty	1
711	Filter 1 Timer	0 = Off
1400	Backlight	1 = Continuous
1401	Brightness	3
1410	Clock	12
1415	Daylight Savings	1 = On
1420	Temperature Offset	0 Deg F.

This article was: Helpful | Not helpful

Report an issue

Article ID: 310

Last updated: 6 Feb, 2023

Revision: 8

Access:

Comments: 0

BBCode tips