TH5320R - Configure 3 Heat / 2 Cool Heat Pump

Honeywell Thermostat: TH5320R Wireless FocusPro

Re: Configure 3 Heat / 2 Cool Heat Pump

To enter Installer Setup, press and hold the "Fan" button and the "Up" button together until the display changes.

Setup# Function Options
0 Zone Number
  • 0 = Leave at "0"
1 System Type
  • 10 = 3 heat/2 cool heat pump
2 Rev Valve
  • 0 = Changeover valve (O/B terminal energized in cooling)
4

  • 1 = 
7 3rd Stg Ht Cycle Rate
  • 9 = For electric furnaces
8 Em Ht Cycle Rate
  • 9 = For electric furnaces
9 Compressor Cycle Rate
  • 3 = Recommended for most compressors
10 2nd Stg Comp Cycle Rate
  • 3 = Recommended for most compressors
11
  • 0 = 
12 Changeover Type
  • 1 = Auto changeover (Heat/Cool/Auto/Off)
14 Temperature Display
  • 0 = Fahrenheit
15 Compressor Off Delay
  • 3 = Three-minute compressor off time
22
  • 0 = 
26 Aux Heat Control
  • 1 = Economy
27

Heat Stop
  • 82 = Highest heating temperature setting
28

Cool Stop
  • 64 = Lowest cooling temperature setting
32

Indoor Temp Display Offset
  • 0 = No offset
33

Outdoor Temp Display Offset
  • 0 = No offset
35

Humidity Display Offset
  • 3 = No Offset
36

Thermostat Name
  • 52 = Thermostat
39

Wireless Setup
  • 0 = Disconnect thermostat from wireless system
  • 1 = Thermostat is connected
90

Reset
  • 0 = No reset
  • 1 = Reset thermostat back to factory configuration

Article ID: 676
Last updated: 6 Feb, 2023
Revision: 3
Thermostats -> Honeywell -> TH5320R Wireless FocusPro -> TH5320R - Configure 3 Heat / 2 Cool Heat Pump
https://ghac.makekb.com/entry/676/