Amana Gas Furnaces: GCAC
Re: Diagnostic Codes / Fault Codes
The original control module in these furnaces is a White-Rodgers 50A50 controller.
Integrated Furnace Control | |
Code | Description |
On | Flame sensed with no call for heat |
1 | Lockout due to failed ignition |
2 | Pressure switch stuck closed |
3 | Pressure switch stuck open |
4 | Open limit |
5 | Missing jumper wire |
6 | Reversed 115V or 24V polarity |
7 | Low flame signal |
8 | Problem with igniter circuit |