Mitsubishi

Re: Remote Control - Switch to Fahrenheit

In some situations the remote control may display temperature and setpoints in Celsius instead of Fahrenheit.

Follow the following steps to switch to Fahrenheit temperatures.

Step 1: Press the SET button with a pointed but not sharp object.

• Make sure that the remote controller display indicates that the unit is stopped.
• MODEL SELECT will blink, and the model number (a three-digit figure) will be lit.

Step 2: Press the AUTO-START button to access the temperature mode.

Step 3: Press the TEMP buttons to set the setting number.

• Settings that correspond to each setting number will appear on the display.
• * If an error is made, press the ON/OFF button to cancel all the settings for the individual settings and go back to Step 1 above. 

Step 4: Repeat Steps 2 and 3 above to make other settings.

Step 5: Press the SET button to store these settings.

• The display will stay lit for three seconds and then go off.