Honeywell RedLink Thermostats
Re: Replacing a Thermostat that is Connected to an Internet Gateway
When replacing a thermostat that is connected to an Internet Gateway, it is necessary to reset the Gateway and re-connect all RedLink thermostats.
- It is not necessary to make any changes to the customer's Honeywell account.
RESET & RECONNECT
1. Reset the Internet Gateway
- Press and hold the "Connect" button on the bottom of the gateway until the light turns orange.
2. Connect all RedLink thermostats to the Gateway
- From the thermostat Home Screen press "MENU"
- Scroll down to highlight and Select "Installer Options"
- Enter the Factory Password (see Factory Password)
- Scroll down to highlight and Select "Wireless Manager"
- Select Add Device
- Follow the instruction on the screen to connect to the Internet Gateway