Honeywell Thermostat: TH8320R & TH8321R VisionPro
Re: OPERATING A HUMIDIFIER
Once a VisionPro thermostat has been configured for Humidification, you can control a humidifier directly from the thermostat interface.
To operate a humidifier from a VisionPro thermostat, you must set the Humidification Mode and the Humidity setting.
- From the Home Screen press the MENU tab.
- Highlight "Humidification" and press Select.
- Use the Left and Right arrows to change the mode to either "Off" or "Auto".
- In the "Off" mode, all Humidifier outputs will remain de-energized regardless of the humidity level.
- In the "Auto" mode, the thermostat will energize the humidifier outputs when Heating is "On" and the sensed humidity level is lower than the desired humidity setting.
- Use the Up and Down arrows to set the desired humidity level.
- A normal Winter humidity level is typically between 25 to 40%.
- Once settings have been made press "Done", and a screen will appear showing that the changes are being saved.
- Press the HOME tab to return to the Home Screen.